|
Support for LCR Sound Systems
The LCR (Left-Center-Right) mode is now supported as a direct response to customer requests. Simply enable the LCR mode in the system configuration to activate this feature.
|
Support for Personal Mixing and Monitoring
The M-400 can be used to setup, configure and control multiple REAC-enabled M-48 Live Personal Mixers. The M-48 represents a breakthrough in professional personal monitoring and mixing.
For the performing musician wanting the best possible sound quality and flexibility in their individual stage mix, the M-48 offers control over 40 audio sources that can be easily managed in 16 assignable stereo groups.
The Next Generation of Simple, High Quality Audio Transfer
|
REAC (Roland Ethernet Audio Communication）is Roland’s original technology for low latency, high quality digital audio transfer. Products using REAC technology are installed today in many venues and have been used for high profile events worldwide.
Access some of Roland’s legendary vintage effects within the M-400. Original sounds used by engineers the world-over extends the range of live expression.
|
Six Newly Added Vintage Effects
The world’s standard in tape echo effect -“RE-201”. Spring Echo is also emulated perfectly.
Employs 3 Flangers and 1 Chorus. Supports Stereo Inputs.
The studio standard - Dimension. Also supports multi-button mode.
The standard Digital Delay of sound reinforcement and recording. Can be used by two channels for dual mono effect.
Dual channel Phaser employs LFO. Also possible to link two units modulation.
The standard in Digital Reverb with a accurately modelled EQ character.
|
GEQs can now be switched to PEQs
Any existing 31-band Graphic EQ can now be switched to an 8-band Parametric EQ. The Real Time Analyzer enables a quick look and instant adjustment of the acoustic characteristics of a venue. M-400 Ver.2.0 Leaflet 
Ver.1.5 Functions
Split out to REAC-SONAR Recording System
The input from the S-4000S can now be distributed to the SPLIT/BACKUP connector (a maximum of 32 channels).
NOTE: In order to distribute inputs using the S-4000S, the firmware of the S-4000S must be version 2.010 or later.
Output Assign to Personal Monitoring System
Direct out has been added to all input channels.
Free Assign of Gate/Comp to channel 1-48
- Gate/expander/ducking is now supported for all input channels.
A maximum of 24 units can be used simultaneously.
- Compressor is now supported for all input channels.
A maximum of 24 units can be used simultaneously.
Addition of 8 Matrix
MATRIX1–MATRIX8 have been added. In addition to mixing audio signals from AUX1–AUX16 and MAIN L/R, you can select and mix any two input channels for each MATRIX.
Addition of Short Cuts
Allows quick access to Effects/GEQ edits or Mute/DCA groups etc.helps faster setup of the console.
You can now use…
[SHIFT] + GATE [DISP] to turn the gate on/off for the selected channel.
[SHIFT] + COMP [DISP] to turn the compressor on/off for the selected channel.
[SHIFT] + AUX SENDS [1]–[16] to turn on/off the AUX send or MATRIX send.
[SHIFT] + USER [1]–[8] to operate user buttons 9–16.
[SEL] button to assign a channel to a DCA group.
[SEL] button to assign a channel to a MUTE group.
Additional Effect
- The DELAY UNIT parameter has been added to delay-type effects.
This lets you specify the delay in any of these units: msec, Meter, Feet, Frame, or Note.
- When specifying the delay in Note units, the TEMPO parameter has been added.
- When using the top panel faders to control the GEQ, you can reset a fader to the 0 dB position by pressing the corresponding MUTE button.
