S-4000S-3208
| Number of Channels |
32 in 8 out |
| AD Conversion |
Sample Rate: 96.0
kHz Signal Processing: 24 bit |
| DA Conversion | Sample Rate: 96.0
kHz Signal Processing: 24 bit |
| Frequency Response | -2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz) |
| Total Harmonic Distortion + Noise |
0.05 % or less
(Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz) |
| Dynamic Range |
110dB |
| Cross Talk | -80dB |
| Nominal Input Level | -65 to -10 dBu (PAD:
Off) -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu) |
| PAD | 20dB On/Off |
| Input Impedance | 20 k ohms |
| Nominal Output Level |
+4 dBu, Max. +22 dBu |
| Output Impedance | 150ohms |
| Recommended Load
Impedance |
10 k ohms or greater |
| Residual Noise Level
(IHF-A, typ.) |
-90dBu |
| Equivalent Input
Noise Level (E.I.N.) |
-128dB |
| Network Latency | 375 microseconds
when using REAC cable only (AD - REAC - DA Latency: about 1.2 ms) |
| Connectors | Input: 32 (XLR type,
balanced, phantom power, 4 ch input module
x 8) Output: 8 (XLR type, balanced, 4 ch output module x 2) REAC: MAIN, BACKUP (RJ-45 EtherCon type) Remote Connector: 1 (RS-232C, DB-9 type) MIDI Connectors: IN, OUT (5-pin DIN type) |
| Indicators | EXT Indicator (External
Power Supply Unit) INT Indicator REAC Indicator CTRL Indicator ALARM Indicator MUTE ALL OUTPUTS Indicator |
| AC Power Supply |
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) |
| DC Power Supply | +24 V (from optional external power supply unit : S-240P): |
| Power Consumption | 130W |
| Dimensions | 482.0 (W) x 336.0
(D) x 266.4 (H) mm 19 (W) x 13-1/4 (D) x 10-1/2 (H) inches |
| Weight |
17.0 kg, 37 lbs 8 oz |
| Current Draw | 6 A |
| Phantom Power | +48 V / 14 mA (each input on SI-AD4, remote controlled) |
| Operation Temperature | 0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit |
| Accessories | Power Cord, REAC
cable (10 m, Cat5e crossover cable) Adhesive-backed number label sheets, REAC Connector Covers Ferrite Cores, Owner's Manual |
| * 0 dBu = 0.775 Vrms | |
S-4000H
| Number of Channels |
8 in 32 out |
| AD Conversion |
Sample Rate: 96.0
kHz Signal Processing: 24 bit |
| DA Conversion | Sample Rate: 96.0
kHz Signal Processing: 24 bit |
| Frequency Response | -2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz) |
| Total Harmonic Distortion + Noise |
0.05 % or less
(Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz) |
| Dynamic Range |
110dB |
| Cross Talk | -80dB |
| Nominal Input Level | -65 to -10 dBu (PAD:
Off) -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu) |
| Input Impedance | 20 k ohms |
| Nominal Output Level |
+4 dBu, Max. +22 dBu |
| Output Impedance | 600ohms |
| Recommended Load
Impedance |
10 k ohms or greater |
| Residual Noise Level
(IHF-A, typ.) |
-90dBu |
| Network Latency | 375 microseconds
when using REAC cable only (AD - REAC - DA Latency: about 1.2 ms) |
| Connectors | Input: 1 (DB-25
type, balanced, 8 channels) Output: 4 (DB-25 type, balanced, 32 channels each) REAC: MAIN, BACKUP (RJ-45 EtherCon type) Remote Connector: 1 (RS-232C, DB-9 type) MIDI Connectors: IN, OUT (5-pin DIN type) |
| Indicators | EXT Indicator (External
Power Supply Unit) INT Indicator REAC Indicator CTRL Indicator ALARM Indicator MUTE ALL OUTPUTS Indicator |
| AC Power Supply |
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) |
| DC Power Supply | +24 V (from optional external power supply unit : S-240P): |
| Power Consumption | 70W |
| Dimensions | 482.0 (W) x 386.7
(D) x 133.0 (H) mm 19 (W) x 15-1/4 (D) x 5-1/4 (H) inches |
| Weight |
9.4 kg, 20 lbs 12 oz |
| Current Draw | 6 A |
| Operation Temperature | 0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit |
| Accessories | Power Cord, REAC
Connector Covers, Ferrite Cores, Connector Guard, Screws for Connector Guard Installation Manual |
| * 0 dBu = 0.775 Vrms | |
S-4000R
| Connector |
Remote Connector: 1 (RS-232C, DB-9 type) |
| Indicators | CLIP Indicators, SIG Indicators, POWER Indicator, REAC Indicator, CTRL Indicator, Level Meter |
| Power Supply |
Supplied from connected device. (S-4000S, S-4000H; through the remote cable) |
| Dimensions |
215.0 (W) x 87.0 (D) x 54.6 (H) mm, 8-1/2 (W) x 3-7/16 (D) x 2-3/16 (H) inches |
| Weight |
0.8 kg, 1 lb 13 oz |
| Operatin Temperature |
0 to +40 degrees celsius, +32 to +104 degrees Fahrenheit |
| Accessories | Remote Cable (3 m), Rack Mount Brackets, Installation Manual |
